Replacing secondary cover
Category name: I want to replace a partHow:
-The transmission does not need to be removed from the vehicle but may be lowered together with the engine for easier access
-Loosen the four screws and discard screws
-Take off secondary cover, remove the small and bigger O-ring and the center sealing ring
-In case of damaged cover, take a new secondary cover
-Replace new O-rings and sealing ring
-Remove the glue (glue from the sealant screws) gently from the transmission housing
-Tighten the secondary cover with 4 new screws, torque 9.5Nm +/- 0.95Nm
